AMSOIL customer Kevin
Harrington trusts AMSOIL 10W-40 Synthetic Motorcycle Oil
in his 2002 Honda CBR954RR.
Kevin Harrington
of Stratham, New Hamshire, began using AMSOIL Synthetic Motorcycle
Oil this year and was eager to tell others of his experience.
"I
am a new customer to AMSOIL,” Harrington said. “After
several years of riding motorcycles, this season I decided
to try AMSOIL."
Harrington purchased
AMSOIL
10W-40 Synthetic Motorcycle Oil for his 2002 Honda CBR954RR.
"I have used Honda-branded GN4 and HP4 non-synthetic
and synthetic oils for the history of owning this motorcycle
from new," he said. "The routine change intervals
have been every 2,000 miles."
After he installed
AMSOIL motorcycle oil, Harrington was surprised at the differences
he experienced in his bike. "I have noticed three key
improvements with the use of AMSOIL Synthetic Motorcycle Oil,"
he said. "The CBR954RR has always had some noticeable
valve clatter at idle. Using AMSOIL motorcycle oil, the valve
clatter at idle has disappeared. There is no more clatter
at idle."
A technician told
Harrington when he bought the bike nearly 10 years ago that
shifting would be "clunky as a normal condition."
According to Harrington,
the wet-clutch lubricity has improved shifting smoothness
significantly.
"AMSOIL Synthetic
Motorcycle Oil for wet-clutch applications has eliminated
the shifting clunkiness and the accompanying noise when shifting,"
Harrington said.
The motorcycle
also ran cooler.
"The motorcycle
cooling system temperature ran consistently at 187 to 194
degrees when cruising at 65 MPH for extended periods during
75-degree weather while running GN4 or HP4 oils," Harrington
said. "I have noticed a repeatable temperature reading
of six to nine degrees lower under the same degree [temperature]
day and speed conditions. It now runs at about 183 to 189
degrees consistently."
"I
am convinced that AMSOIL motorcycle oil is clearly the renewal
required for my high-performance motorcycle and superior to
other commercially available products," Harrington said.
"No other oil will be used in my CBR954RR unless AMSOIL
introduces an even better product that exceeds the practical
application and test results of the AMSOIL 10W-40 Synthetic
Motorcycle Oil."
The second edition of the
motorcycle white paper, A Study of Motorcycle
Oils, is now available. Many of the same oils
that were tested for the original edition were included
again, and a few new oils were added. See the test results
as the top motorcycle oils are tested against each other.
(read
more)
Find
Out How To Get A Large Discount On All Your AMSOIL
Purchases.
Use this form
to get complete product, technical, wholesale pricing,
preferred customer and special discount information.
Receive valuable
weekly newsletter by email - please complete this
form.
SYNZILLA.com
LLC
Premium AMSOIL
Synthetic Motor Oils offer the longest drain intervals
on the market, unsurpassed protection and performance that
effectively extends equipment life and improved fuel economy,
saving customers money at the pump and reducing the nation's
dependence on foreign oil.
"AMSOIL INC. warrants that the use of its lubricants will not cause mechanical damage to any mechanically sound equipment when AMSOIL INC. products are used in full compliance with the company's recommendations and instructions."
AMSOIL
synthetic motor oils are formulated to surpass engine test
specifications, offering protection far greater than competing
motor oils for extended drain intervals. Most synthetic oil
manufacturers make no claim to extended drain intervals, deferring
to the maintenance schedule provided by the vehicle manufacturer.
With its unparalleled oil and warranty program, AMSOIL offers
consumers unprecedented protection and economics.
Another
AMSOIL First
More than 20 years
ago, AMSOIL began using the NOACK volatility test as a comparison
tool and measurement of quality. Back then, nearly every oil
tested side-by-side with AMSOIL synthetic motor oils failed,
and those that passed barely squeaked by. Other oil companies
paid no attention to NOACK results until Ford Motor Company
made it a requirement for service fill oils, validating what
AMSOIL had said all along.
THE
NOACK Volatility Test
The NOACK
Volatility Test determines the evaporation loss
of lubricants in high temperature service. The more
motor oils vaporize, the thicker and heavier they become,
contributing to poor circulation, reduced fuel economy
and increased oil consumption, wear and emissions. AMSOIL
Synthetic Motor Oil resists high temperature volatization
better than other motor oils. AMSOIL Synthetic Motor
Oil maintains peak fuel efficiency and reduces oil consumption
and emissions.
AMSOIL Now An ISO Certified
Manufacturer
AMSOIL recently
received ISO 9001:2000 certification of our Quality Management
System (QMS). NSF International Strategic Registrations is
the registrar that has verified our QMS meets the requirements
of the ISO 9001:2000 standard, the most widely utilized quality
standard throughout the world for quality management systems.
ISO standards are used by over 300,000 companies worldwide
setting rigorous standards for businesses, government and
industry.
ISO 9001:2000
is applicable to any manufacturing and service organization
providing a framework for system development that focuses
on the customer, quality system performance and ongoing improvement.
AMSOIL received ISO 9001:2000 registration under the scope:
synthetic lubricants blending, packaging, and other fulfillment
directly associated with lubricant product.
The ISO
certification puts AMSOIL in line with some of the most efficient
companies in the world. It is further assurance that the products
and services AMSOIL provides will continue to maintain the
high level of quality the company always demanded.
AMSOIL Wholesale Pricing Information
Find
Out How To Get A Large Discount On All Your AMSOIL
Purchases.
Use this form
to get complete product, technical, wholesale pricing,
preferred customer and special discount information.
Receive valuable
weekly newsletter by email - please complete this
form.
I welcome the opportunity
to work with you personally as your servicing AMSOIL Dealer.
Use the information on this website to contact me. You may
also check out the AMSOIL
Corporate Website for product and business opportunity
information.
If you would like more information
about AMSOIL INC., click one of the links below:
