To
order a free catalog | Click
here |
To buy AMSOIL
products, visit the AMSOIL
Online Store
|
Buy AMSOIL at wholesale prices |
Buy
AMSOIL By Phone from AMSOIL Headquarters
7am-5pm Central Time, Toll-Free at: 1-800-777-7094
Give Operator Sponsor
# 504006
For
Fastest Service
Trucker Saves Thousands with
AMSOIL
 |
| Blake Thompson is one happy
trucker - in front of his first tractor
trailer that he switched over to AMSOIL products. |
Blake Thompson
is one happy trucker.
Using AMSOIL products
in his diesel engines saved him $5,000 in fuel costs in one
year.
In 2006, Thompson
was a diesel mechanic in Fortville, Indiana when he fist became
familiar with AMSOIL products. Thompson had a dream of owning
his own trucking company.
In November 2007,
Thompson bought his first diesel tractor – a 1999 International
with an M11 Cummins engine, an Eaton 4-9 transmission, five
low-range gears, four high-range gears and a twin screw (two
differentials) rear-end. “It was in beautiful shape
with 580,000 original miles,” Thompson said.
Thompson is now
a local hauler with two trailers. He uses one for hauling
wood products – sawdust and wood chips, and the other
for agricultural products, including corn and soy beans. The
truck and tractor have a maximum gross weight of 80,000 pounds.
Thompson had his
truck for only a short time before he switched to AMSOIL.
With 590,000 miles on his tractor, he signed on the dotted
line to become a commercial account. He purchased AMSOIL
Engine Flush (AEF) and twin packs of AMSOIL
15W-40 Heavy Duty Diesel and Marine Oil (AME).
Thompson said he
is more than happy he switched to AMSOIL products. He reports
that while towing his hopper trailer his fuel mileage increased
from 5.5 to 6.0 miles per gallon. While towing his walking
floor trailer the fuel mileage increased from 6.0 to 6.5 miles
per gallon.
Oil analysis at
10,000 and 20,000 miles showed the oil was “good for
continued use.” Typical oil drain intervals for the
big diesel engine is 20,000 miles.
Thompson was spending
$75,000 a year on fuel. After investing $500 in AMSOIL products,
he is spending $69,500 a year on fuel. That’s a savings
of $5,000 per year!
Thompson is considering
using oil analysis to extend his oil drain intervals even
further, but Thompson said he is so happy about the fuel savings
that he is satisfied changing the oil at his current drain
intervals.
Thompson also uses
AMSOIL
Synthetic 5th Wheel Grease (GFW) “because it goes
on easy and stays where you put it.” He can also see
the difference in the spring shackles and king pins with AMSOIL
Synthetic Heavy Duty Grease (GHD). Thompson says he used
to have to pump several pumps, with brand X grease, before
the grease started squeezing out. Now when he starts to pump
the grease gun, the grease immediately starts to squeeze out
of the joints. “That shows that the AMSOIL
Heavy Duty Grease stays where you put it.”
Thompson’s
business is growing. He recently bought another used tractor
that has more than 470,000 miles on the engine. He says he
will use AMSOIL
15W-40 Heavy-Duty Diesel and Marine Motor Oil in that
one too, and he is eager to try the gear
lube in his bearings, transmission and differentials.
Thompson has continued
to buy AMSOIL
15W-40 Heavy Duty Diesel and Marine Motor Oil, Oil
Sample Kits, Heavy
Duty Grease and 5th
Wheel Grease.
Truck Driver Takes Big Savings
to the Bank Using AMSOIL Products
Terry Anderson
Jr. of Chesapeake, Virginia saves money, time and fuel using
AMSOIL products.
In fact, he saved
$5,679 the first year he switched to AMSOIL lubes, filters
and additives.
 |
| TAKING SAVINGS TO THE
BANK - Terry Anderson with his 2005
Peterbilt dump truck. Anderson reports savings of $5,679
in one year using AMSOIL lubes and filters. |
Anderson, owner
of Terry Anderson Jr. Hauling Inc., owns and operates a 2005
Peterbilt dump truck with a Cat C-7 engine. He first installed
AMSOIL
15W-40 Synthetic Heavy Duty Diesel and Marine Motor Oil
and an AMSOIL
Ea Oil Filter in the truck. About a month later, he installed
an AMSOIL
By-Pass Filtration System.
“initially,
I was concerned about the upfront cost of about $400, but
soon found out it was money well spent,” he said.
Used oil analysis
at 10,000 and 25,000 miles deemed the oil suitable for continued
use, and he continued to run on the same oil.
“I changed
my full flow filter after the second sample was sent in,”
Anderson said. “The money I saved on oil alone in the
first 25,000 miles paid for the by-pass filter system.”
At one year, and more than 50,000 miles on the same oil, a
third oil analysis reported the oil good for continued use.
“The savings in the oil changes alone is enough to justify
using AMSOIL and the by-pass filter system,” Anderson
said. “More surprising was the increased fuel efficiency
I saw on a daily basis.”
He typically changes
the oil in the Peterbilt four or five times a year at $159
each change. “That is $759 a year.” He said. “I
didn’t have to get my hands dirty changing the oil at
all for a year thanks to AMSOIL and the by-pass filter system.”
Anderson also realized
increased fuel efficiency. “After changing my Peterbilt
over to AMSOIL lubricants and filters, I saw an increase in
my fuel efficiency of one mile per gallon,” he said.
His fuel efficiency increased again when he used AMSOIL Diesel
Concentrate and Cetane Boost. “MPG is huge in my world,”
Anderson said. “The more miles I can go on one gallon,
the more money I put in the bank.”
With diesel fuel
prices being so high, AMSOIL lubricants, filters and additives
have saves Anderson’s company about $30 a day in improved
fuel efficiency.
Savings he realized
in the first 15 days with AMSOIL products paid for his initial
investment, Anderson said. “The remainder of the year
that $30 a day went straight to the bank along with the savings
from the extended drain intervals.”

Premium AMSOIL
Synthetic Motor Oils offer the longest drain intervals
on the market, unsurpassed protection and performance that
effectively extends equipment life and improved fuel economy,
saving customers money at the pump and reducing the nation’s
dependence on foreign oil.
"AMSOIL INC. warrants that the use of its lubricants will not cause mechanical damage to any mechanically sound equipment when AMSOIL INC. products are used in full compliance with the company's recommendations and instructions."
FULL
WARRANTY
AMSOIL
synthetic motor oils are formulated to surpass engine test
specifications, offering protection far greater than competing
motor oils for extended drain intervals. Most synthetic oil
manufacturers make no claim to extended drain intervals, deferring
to the maintenance schedule provided by the vehicle manufacturer.
With its unparalleled oil and warranty program, AMSOIL offers
consumers unprecedented protection and economics.
Another
AMSOIL First
More than 20 years
ago, AMSOIL began using the NOACK volatility test as a comparison
tool and measurement of quality. Back then, nearly every oil
tested side-by-side with AMSOIL synthetic motor oils failed,
and those that passed barely squeaked by. Other oil companies
paid no attention to NOACK results until Ford Motor Company
made it a requirement for service fill oils, validating what
AMSOIL had said all along.
THE
NOACK Volatility Test
The NOACK
Volatility Test determines the evaporation loss
of lubricants in high temperature service. The more
motor oils vaporize, the thicker and heavier they become,
contributing to poor circulation, reduced fuel economy
and increased oil consumption, wear and emissions. AMSOIL
Synthetic Motor Oil resists high temperature volatization
better than other motor oils. AMSOIL Synthetic Motor
Oil maintains peak fuel efficiency and reduces oil consumption
and emissions. |
AMSOIL Now An ISO Certified
Manufacturer
AMSOIL recently
received ISO 9001:2000 certification of our Quality Management
System (QMS). NSF International Strategic Registrations is
the registrar that has verified our QMS meets the requirements
of the ISO 9001:2000 standard, the most widely utilized quality
standard throughout the world for quality management systems.
ISO standards are used by over 300,000 companies worldwide
setting rigorous standards for businesses, government and
industry.
ISO 9001:2000
is applicable to any manufacturing and service organization
providing a framework for system development that focuses
on the customer, quality system performance and ongoing improvement.
AMSOIL received ISO 9001:2000 registration under the scope:
synthetic lubricants blending, packaging, and other fulfillment
directly associated with lubricant product.
The ISO
certification puts AMSOIL in line with some of the most efficient
companies in the world. It is further assurance that the products
and services AMSOIL provides will continue to maintain the
high level of quality the company always demanded.
|
AMSOIL Wholesale Pricing Information
Find
Out How To Get A Large Discount On All Your AMSOIL
Purchases.
Use this form
to get complete product, technical, wholesale pricing,
preferred customer and special discount information.
Receive valuable
weekly newsletter by email - please complete this
form.
SYNZILLA.com
LLC |
Which
AMSOIL Products Are Recommended For Your Car or Truck?
| Click
Here And Enter Your Vehicle Information To Find Out
|
Click
It, Print It, and Mail It
|
Printable Dealer Application |
Mail
your completed dealer application to:
AMSOIL Inc., AMSOIL Building, Superior, WI 54880.
Register
to receive valuable WHOLESALE PRICING information and AMSOIL
product updates by email
I welcome the opportunity
to work with you personally as your servicing AMSOIL Dealer.
Use the information on this website to contact me. You may
also check out the AMSOIL
Corporate Website for product and business opportunity
information.
If you would
like more information about AMSOIL INC., click one of the
links below:
|